Lock Bumping Keys and probably the most common service a locksmith can supply you would be to get you back again into your home in the occasion that you have locked you and your family out. This gets to be even much more tough when you have misplaced your house keys. What exactly can a locksmith do to assist you? For starters, as soon as he’s within your residence, he can take the lock cylinder to pieces and decode the pins. From your information he has obtained, an authentic key that matches the misplaced one could be produced. You’ll be able to then have as many duplicates created from this in case you might be inclined to misplacing your keys.
Lock replacement and lock improvement are two other services that a expert locksmith will likely be able to supply. The same as just about anything, a lock will eventually wear out in due time, whether it’s due to the lock cylinder getting worn out due to too much use or even the latch bolt breaking from being retracted once too frequently. Becoming up to date on all modern lock designs and residential safety concerns is something that your neighborhood locksmith will have firsthand understanding on. For example, he will probably be fully aware with the dangers that lock bumping poses and definitely will recommend which you go for a driver pin upgrade.
This task is achieved by replacing all standard driver lock pins using the type that is from the spooled or mushroom variety. If you would like to spend less money on this, it is best that you have this protection upgrade accomplished when your locks are being rekeyed.
Even though you’re inside the process of building your home, you may not be conscious that your particular contractor is reducing costs by building your home with only one knob or lever handle securing one or both of the garage area doors. This is a big safety risk since the dead latches on knobs as well since the lever handles do not extend far enough in to the door jamb. A robber can effortlessly break in and get his hands on your valuables. Lock Bumping Key, in order to address this, you’ll require to install a brand new deadbolt above the knob on all your exterior and garage doors. A professional locksmith may also offer you some more reinforcement for the doors within the shape of security strike plates with three inch screws. This may aid reinforce your door jamb from any kick-in-the-door attack.
Lastly, the locksmith you employ will likely be able to open any combination safe you’ve at home. At times, you might have lost the safe’s combination over time because of memory loss or perhaps the holder of the combo died and took the secret to the grave. Whatever the case may be, a locksmith will probably be able to destroy that safe open after which restore it back to its original working order. If you want to steer clear of this from occurring in the foreseeable future, it really is suggested that you simply go for a contemporary digital lock. A lock like this can allow you easy entry together with the ability to change the lock combo anytime.
In order for a High Security lock to earn the UL listing High Security to fight lock bumping , a lock or cylinder must meet strict construction guidelines and a sample model must pass rigorous performance and attack tests. Some of the requirements are as follows:
All working parts of the mechanism must be constructed of brass, bronze, stainless steel, or equivalent corrosion-resistant materials or have a protective finish complying with UL’s Salt Spray Corrosion test.
Have at least 1000 key changes
Operate as intended during 10,000 complete cycles of operation at a rate not exceeding 50 cycles per minute.
The lock must not open or be compromised as a result of attack tests using hammers, chisels, screwdrivers, jaw-gripping wrenches, pliers, hand-held electic drills, saws, puller mechanisms, key impressioning tools, and picking tools.
The attack test includes 10 minutes of picking, 10 minutes of key impressioning, 5 minutes of forcing, 5 minutes of drilling, 5 minutes of sawing, 5 minutes of prying, 5 minutes of pulling and 5 minutes of driving.
Another important factor in lock bumping security is key control. The most secure locks have patented key blanks that are available only from the lock manufacturer. At the next level of key control are key blanks that can be cut only on special key machines. This type of key control greatly reduces the number of places where an unauthorized person can have a key duplicated. The least secure locks use keys that can be copied at virtually any hardware or department store. To learn more about lock bumping and high security locks you can visit this link to Amazon and purchase The Complete Book of Locks and Locksmithing
One of the biggest problems is that few locks are immune from lock bumping. This is because most locks work on the same principle. The most common type of lock, found on every home and business in the world, is the pin-and-tumbler lock. To understand how lock bumping works, it helps to understand how a pin and tumbler system functions.
Inside every pin and tumbler lock is a cylinder (or key cylinder.) Within the cylinder is a chamber (the plug) containing stacks of pins. The pins it contains vary in length. When the correct key is inserted into the cylinder, the ridges or teeth on the key match the pins inside. Rotating the key causes the pins to spring apart and the plug to rotate. This rotation releases the latch from the door jamb.
Trying to insert the wrong key will produce one of two results. Either the key will not enter the cylinder at all, or, it will enter the cylinder, but won’t be able to rotate the plug because the match is incorrect.
Old-school lock picking usually requires a broad range of tools. Lock bumping, in contrast, requires only one special key. A lock bump key looks like an ordinary door key. It would be unlikely to draw any suspicion, were it to be used to gain illegal entry to a home.
To the untrained eye, a bump key might pass for a regular key. A closer inspection, though, would reveal that the teeth (or ridges) and the notches are even. All of the cuts, in fact, are made to maximum depth. They may also be referred to as “dummy keys” or “999″ keys. The number “999″ is derived from the fact that the cuts are all made to a depth of nine.
Opening a door lock with a 999 key isn’t as simple as simply inserting and turning. It does take a particular feel and a certain degree of practice, just as old-fashioned lock picking does.
What is alarming about bump keys is that only two tools are required: a 999 key and a small “bump tool.” A would-be criminal will draw much less attention to himself with a bump key than with a set of locksmithing tools.
Once upon a time, bump keys became public knowledge and that made locksmiths very unhappy. Why? It gave locksmiths a bad impression in society and spread out trade secrets that exposed how endangered the public had become with locks that are currently on the market causing suspicion and uncertainty among the general society.
If you just heard about lock bumping and are searching for more information about it then you can visit this public site Lock Bumping. They have a wealth of information about lock bumping. There are a few lock bumping videos out there that will scare the pants off you. I have even seen some videos of how to lock bump.
Lock bumping originated in Europe. It seems that in late 70′s some locksmiths figured out how to compromise our conventional door locks. This was all well and good because the rest of the world knew nothing of this. But with the advent of internet and it was only a matter of time before this secret lock bumping technique got out and into the wrong hands. All you have to do is type in bump keys and you will get a bunch of companies selling the keys.
There are a few lock bumping solutions out there. Security experts suggest that you light up your doors, get a dog or just put better high security locks on your doors. The high security locks cost around 150 each but it is well worth the piece of mind if you are really frightened by lock bumping and the though of someone have a key to your doors.
I personally had to try lock bumping to see if it works. To my amazement it took me only 30 minutes or so to figure it out. I was truly amazed when the lock actually opened from this lock bumping technique.